Northwest Doors - Panel Doors Residential Doors Parts and Services

Panel Doors

The garage door is a focal point of your home. Selecting a beautiful raised or recessed panel door will make a lasting impression. A luxurious real wood garage door adds warmth and elegance to any home and to its surrounding. Northwest Door is manufactured by seasoned craftsmen and use only the finest materials available, "They are built to last, beautifully".

View Options | Warranty (104kb)


Door frames are constructed using 1-3/8" thick finger-jointed West Coast Hem/Fir with Mortise and Tenon stiles and rails. Choose from these recessed 1/4" panel materials, Model 321 Luan Mahogany Plywood Panels, Model 326 Rough Sawn Fir Plywood, and Model 322 Tempered One Side Hardboard Panels. Raised panels are 3/4" thick, Model 323 Hem/Fir Panels, Model 327 MDF Panels, Model 328 Clear Cedar Panels, and Model 324 Redwood Panels. Also available, Model 828, the All Cedar Raised Panel Door manufactured with solid Western Red Cedar Frame and Clear Western Red Cedar Panels.
  • Frame thickness: 1-3/8"
  • Top & Bottom Rail widths: 4-7/8", Meeting Rail Width combined: 4-1/2"
  • End Stile width: 4-1/2", Center Stile width: 2-5/8"
  • Raised Panel thickness: 3/4"
  • Finish: Face sanded ready for finish
  • 1 Year Limited Warranty
  • Wood Door Finishing Instructions
  • Widths up to 20', heights up to 12', in one inch increments (180 max. sq. ft. total)
  • 1/4" Rough Sawn Fir plywood panel
  • 3/8" grooved Medium Density Overlay plywood with V-grooves 3" or 4" on center
  • 3/4" Western Red Cedar or West Coast Hem/Fir raised panels
  • Solid Rail West Coast Hem/Fir wood frame (more suitable appearance for staining)
  • Flush back of bottom section with 1/4" plywood (standard on doors over 12 ft. wide)
  • Flush back of door 1/4" Luan plywood & insulate with 5/8" Polystyrene insulation
  • Decorative hardware
  • 1/8" clear annealed glass standard, clear obscure and insulated glass optional
  • Low clearance, high lift and vertical lift track and hardware
  • The Panel Doors is equipped with heavy duty 15" radius torsion hardware; bracket mounted 2" track is 2". 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. Single car doors include one 2-1/4" strut per door; double care doors include one 2-1/4" strut per section.

      Panel Doors
Standard WidthsPanels Horizontally
  8'-0"2, 3, 4
  9'-0"2, 3, 4
  10'-0"3, 4
  12'-0"3, 4, 6
  16'-0"4, 5, 8
  18'-0"5, 8
Standard HeightsRecessed Panels VerticallyRaised Panels Vertically
  7'-0"4, 55
  For ease of operation do not exceed 28" Section Height


Serving The Following Areas: Pierce County, King County, Algona, Auburn, Beaux Arts Village, Bellevue, Black Diamond, Bonny Lake, Bothell, Browns Point, Buckley, Burien, Clyde Hill, Covington, Dash Point, Des Moines, Edgewood, Enumclaw, Fall City, Federal Way, FIfe, Fox Island, Frederickson, Gig Harbor, Hunts Point, Issaquah, Kenmore, Kent, Kirkland, Lake Forest Park, Lakewood, Medina, Maple Valley, Mercer Island, Milton, Newcastle, Normandy Park, North Bend, Pacific, Parkland, Puyallup, Ravensdale, Redmond, Renton, Sammamish, Seatac, Seattle, Shoreline, Skykomish, Snoqualmie Pass, Snoqualmie , Spanaway, Steilacoom, Sumner, Tacoma, Tukwila, University Place, Woodinville, Yarrow Point